Model CR-1526
CR-1526C is 208 Voltage, CR-1526A is 230 Voltage, CR-1526B is 460 Voltage
60 Hz. 50 Hz.
Voltage: ........................................................... 208, 230, 460 190-220/380-415 (customer must specify voltage)
Amperage (Approx.): ................................................................. 30, 26, 15 17.4-17.2/8.7-8.6
*Electrical Service to Unit: ........................................ No. 8, No. 10, No. 14 No. 14
Pump: ............................................................ Regenerative
Airflow @ 3" Opening (Approx.): ............................................... 405 C.F.M. 9.5 CMM
Sealed Vacuum (Approx.): ........................................................... 125" H2O 292 cm H2O
RECOMMENDED RELIEF VALVE SETTING: ......................... **90" H2O **188 cm H2O
Dimensions (Approx.):
Power Unit:
Length:
.......................................................... 24-1/8"
Width:
........................................................... 18-5/8"
Height: ......................................................
21-13/16"
Shipping Weight (Approx.):
............................................................ 300 lbs.
Inlet Connection:
................................................................. 3-1/2" I.D.
Outlet Connection:
................................................................. 3-1/2" I.D.
Primary Filter - DC-2600 (For use with fine dust ONLY.)
Inlet and Outlet Connections: ................................................... 3-1/2" O.D.
Diameter: ............................................................................ 25"
Height: ............................................................................ 87"
Radius (including support legs): ............................................................ 17"
Capacity (Approx.): ...................................................................... 15 Gal.
Shipping Weight (Approx.): ............................................................ 265 lbs.
Secondary Filter - DC-1603
Inlet and Outlet Connections: ................................................... 3-1/2" O.D.
Diameter: ............................................................................ 19"
Height: ............................................................................ 29"
Filter Area (Approx.): ................................................................. 7.5 Sq. Ft.
Shipping Weight (Approx.): .............................................................. 60 lbs.
Replacement Filter: .................................................................... FB-1603
*Electrical Service to unit should be installed by a licensed
electrician.
*Preferred Setting
NOTE:
All commercial and industrial units should use 2-conducters, 18 gauge minimum for low voltage wiring (2VM-18001).**NOTE:
Relief Valve should be set at a preferred setting of 90" H2O at 60 Hz. and 188 cm H2O at 50 Hz., when possible, use the preferred/recommended settings above.NOTE:
You should contact the factory for applications before ordering.NOTE:
First five feet of exhaust MUST be metal 3-½" O.D. tubing (SF-3075).Use with fine dust ONLY, not for use with general cleaning.