Model CR-1525 CR-1525C is 208 Voltage, CR-1525A is 230 Voltage, CR-1525B is 460 Voltage
	60 Hz.	50 Hz.
Induction Motor	3Ph, 10HP, 3450 RPM	3 Ph, 8HP, 2850 RPM
Voltage	208, 230, 460	190-220/380-415
Amperage	30, 26, 15	17.4-17.2/8.7-8.6
Length	19-9/16
Electrical Service to Unit	No. 8, No. 10, No. 14	No. 10/14
Airflow @ 3" Opening	405 C.F.M.	9.5 CMM
Sealed Vacuum	125" H2O	292 cm H2O
Pump	Regenerative
RECOMMENDED RELIEF VALVE SETTINGS	90" H2O H2O	188 cm H2O
Dimensions
Length	24-1/8"
Width	18-5/8"
Height	21-13/16"
Shipping Weight	300 lbs.
Inlet Connection	3-1/2" I.D.
Outlet Connection	3-1/2" I.D.

Primary Filter - DC-2530
Filtration	Cyclonic funnel primary, standpipe secondary with safety filter.
Inlet and Outlet Connections	3-1/2"O.D.
Capacity	30 Gal.
Diameter	25"
Height	77"
Radius including legs	17"
Shipping Weight	265 lbs.
Replacement Filter	FD-2500 (2 Required)
Replacement Bag	FD-2530

Secondary Filter - DC-1603
Filtration	High efficiency reusable bag filter.
Inlet and Outlet Connections	3-1/2" O.D.
Capacity
Diameter	19"
Height	29"
Shipping Weight	60 lbs.
Replacement Filter	FB-1603

* Electrical Service to unit should be installed by a licensed electrician.

NOTE: All commercial and industrial units should use 2-conducters, 18 gauge minimum for low voltage wiring (2VM-18001).

NOTE: Relief Valve should be set at a preferred setting of 90" H2O at 60 Hz. and 188 cm H2O at 50 Hz., when possible use the preferred/recommended settings above.

NOTE: First five feet of exhaust MUST be metal 3-½" O.D. tubing (SF-3075).